BI-MATIC
Used Dynamic 4.5SE Edgebander
Images
Machine Information
Features
- Heated Steel Infeed Fence – Controlled by thermostat with temperature range 0-90° C
- Glue Pot – 3-litre capacity with quick heat up time approximately 6 minutes. Using a spring loaded handle the whole glue pot assembly can be moved. This allows edge trimming without using glue roll. TEFLON coated port for easy clean-up
- Glue Roller – Machined with fine lines to spread glue smoothly. Heat treated upper bushing for glue roller which makes it more resistant to high temperature and wear. The low wear resistant lower seal, rulon lower bushing and machined steel housing all contribute to minimum wear and longer life span of these components
- Coil Magazine – Large diameter coil magazine for 3 mm PVC for material thickness from 0.4 mm up to 5 mm. Single strip edge feed.
- Coil Cut-Off Device – Oscillating vertical shear for ABS and PVC
- Pressure Zone – 140 mm diameter motorized main pressure roll, 2 idle rolls of 60 mm diameter each. Pressure zone is manually adjustable via hand wheel and digital counter is used for reading the position. Unit is mounted on 30mm thick machined steel block
- Microprocessor – Control panel mounted on pedestal at infeed. Controls pneumatic functions on end trim and scraping units. The system controls temperature setting, indicates feed speed, number of pieces worked and number of hours worked. Sets line control values for magazine, PVC cut off device, front and rear end trim unit.
- Base – Top plate is 15mm thick steel. Welded steel machine frame 3mm thick and comes with 5 cross supports @16mm thick
- Automatic adjustment of top trim and top buffing unit, which are tied in with pressure beam adjustment.
- Electronic frequency inverter
- Protective hood
- Emergency stops at front and end of machine
- Stop feed track button located on left side of machine
- Separate door for glue pot, strip magazine and coil cutoff device
- Electronic temperature control system for working and stand by temperature
Units
Specifications
Machine Details
