Used M412 4-Side Planer/Moulder


Machine Information

  • Allows for 4 cutting modes: single two, three and 4-side planing and moulding.
  • Individual powerful motor drive for each spindle.
  • High quality disco type variable feed speed unit.
  • Automatic machine stop when top guard is opened.
  • In feed & outfeed table extensions (optional) for firm support of large word.
  • Equipped with 3 depth of cut control plates for bottom cutterhead.
  • Sea-thru top guard for viewing cutterheads.
  • Comes with straight knives for top / bottom heads
  • Does not include side heads

  • All motion controls of the machine are centralized on the control panel, located at the left side of the machine for easy access and operation convenience.
  • Each cutterhead is individually controlled on the control panel

  • Equipped with two planer knives and two pattern knives for planing and moulding operations at a time.

  • The left vertical spindle can be adjusted in forward and backward direction to suit workpiece width. A mechanical meter is equipped for accurate reading of the spindle adjustment amount.

  • The entire table can be raised or lowered by turning a handwheel, equipped with a mechanical meter for accurate reading of the table adjustment.

  • Variable feed speed is achieved through a disco type variable speed unit speed combined with gear reducer, making this moulder ideal for cutting soft and hard wood material.
  • Variable feed speed range is 11-52 feet per minute
Planing Width: 13” (330MM) Depth: 7/16” – 9” (12 – 230mm)
2-Side Planing/Moulding Width: 13-5/8″” (346mm) Depth: 7/16” – 9” (12 – 230mm)
4-Side Planing/Moulding Width: 0 – 12” (0 – 305mm) Depth: 7/16” – 4” (12 – 100mm)
Top Horizontal Spindle Width: 17-15/16” (455mm) Max. planing depth: 5/16” (8mm) Max. moulding depth: 3/4” (19mm) Speed: 7000 RPM Cutterhead diameter: 2-7/8” (72mm) Motor: 7-1/2HP (5.5Kw)
Bottom Horizontal Spindle: Width: 13-5/8” (346mm) Max. planing depth: 1/4” (6mm) Max. moulding depth: 3/16″ (5mm) Speed: 7000 RPM Cutterhead diameter: 2-7/8” (72mm) Motor: 5HP (3.7Kw)
Right & Left Vertical Spindles Max. cutting height: 4” (100mm) Max. cutting depth: 13/16” (21mm) Spindle diameter: 1-1/4″ (31.75mm) Speed: 7000 RPM Max. cutterhead diameter: 3-1/2” (90mm) Motor: 4.1HP (3Kw)
Table Area: 1125 x 685 mm Elevation: 230mm Power Table (Raise): 120w
Dust Hood Outlet 101.6mm (4″)
Feed System Speed (Variable): 11-52 ft/min. Motor: 1/2HP (0.375Kw)
Machine Dimensions (LxWxH) 1485 x 1265 x 1216 mm
Packing Dimensions (LxWxH) 1350 x 1140 x 1130 mm
Net Weight 635kgs (1400bs)
Gross Weight 730kgs (1610lbs)
Machine Details

Condition: Very Good
Year Mfg: 2017
Electrics: 460/3/60
Serial No.: M41200206-17
Listing No.: MDCANM412-1-910087