HOUFEK

Twingo Brushing Machines (Sanding/Wire Brush)

Machine Information

Features

Available in 1, 2, 3, or 4 heads

TWINGO brushing machine serves for processing of surfaces of small and medium-size workpieces from wood or composite materials produced on the basis of wood and some plastic substances

The TWINGO brushing machine is a universal machine used for the following working activities:

  • Cleaning of surfaces after previous operations, e.g. milling, thickening and sanding as a preparation for following operations concerning treatment of surfaces, e.g. varnishing, staining, waxing, etc. For this purpose working brushes with natural or synthetic fibres with low hardness are used.
  • Polishing of surfaces after previous operations, e.g. fine sanding, waxing, staining, etc. For this purpose working tools – disks are used produced on a textile basis, various polishing felts, etc.
  • Finishing fine sanding on previously processed workpieces after previous rough sanding, milling, etc. For these purposes working tools – brushes are used produced, e.g. from foils of sanding materials on a textile or paper base or special disks equipped with fibres containing sanding components or disks with a combination of foils and fibres.
  • Surface treatment, structuring and brush graining. These working procedures serve for processing of surfaces of workpieces produced mainly from massive materials. The objective of these procedures is creation or emphasis of the natural structure of the wood. For this purpose a wide assortment of working tools – brushes is delivered – Selection of a suitable tool is derived from the requirement of the working procedure and the resulting required structure. The working parts of tools are in this case produced from natural, synthetic or metal fibres with various properties.

STANDARD EQUIPMENT

  • Motor 1 x 4 kW / 1 x 5,5 HP (300 B, 600 B)
  • Motor 2 x 4 kW / 2 x 5,5 HP (300 BB, 600 BB)
  • Outer tool diameter 120 – 300 mm
  • Independent height adjustment of sanding units
  • Shaft diameter 40 mm
  • Height adjustable rubber rollers
  • Motorized working unit height adjustment
  • Automatic star/delta switch
  • Two feed speeds 4,5/9 – m/min
Specifications
TWINGO 300B 300BB 600B 600BB
Working width mm 300 300 600 600
Max. workpiece height mm 300 300 300 300
Feed belt speed m/min 4,5/9 4,5/9 4.5/9 4,5/9
Motor power kW 1 x 4 2 x 4 1 x 4 2 x 4
Tool diameter mm 120 – 300 120 – 300 120 – 300 120 – 300
Tool length mm 300 300 600 600
Tool rotation speed rpm 1140 1140 1140 1140
Machine length mm 1040 1610 1040 1610
Machine width mm 760 760 1060 1060
Machine height mm 1450 1450 1450 1450
Machine weight kg 510 690 620 820

*Horse power of feed belt depends on number of units and if inverter is included on feeding.

  • Twingo B, BB with inverter – 0.37 kW (0.5 HP )
  • Twingo BBB with inverter – 0.55 kW (0.75 HP)
  • Twingo BBBB with inverter – 0.75 kW (1 HP)

Any number of heads with no inverter on feeding – two speed motor 0.55/0.75  kW

Optional Equipment
  • Motor 5,5 kW / 7,5 HP
  • Motor 7,5kW / 10 HP
  • Electronic measuring of working position with digital display
  • Feed belt motor frequency converter – belt speed 3-12 m/min
  • Brushing motor frequency converter – ( RPM 180-1000)
  • Automatic feed belt tracking
  • Front table extension
  • Rear table extension
  • Forward/reverse shaft rotation
  • Vacuum table
  • Vacuum pump 4 kW
  • Ammeter for main motor
  • Brushing unit oscillation
  • Steel brush D=150 mm
  • Abralon brush D=150mm
  • Nylon brush D = 150 mm
  • Abrasive brush D = 150 mm
  • Pig hair brush D = 150 mm
  • Horse hair brush D = 150 mm
  • Fibre brush D = 150 mm

Video