CANTEK

GTM1020W 40″ Double Surface Planer

Machine Information

FEATURES
  • Heavy duty cast-iron machine body and table for vibration-free running
  • Cutterheads are spiral insert type with six (6) rows of carbide inserts.  These cutterheads produce an excellent finish, run much quieter than conventional straight knife heads, and require less HP to perform the planing operation.  The inserts are an industry standard item, and have two (2) cutting edges.
  • Pneumatically operated disk brake for cutterheads
  • Conveyor feed system uses a spring loaded pin arrangement to pass material over the bottom jointing head.  A driven rubber top roll, after the top head, delivers the material out of the machine
  • 4 Driven Top & Bottom Outfeed Rolls which ensure powerful feeding of difficult materials
  • Set of five infeed and five outfeed idle bed rolls.
  • Digital electronic thickness adjustment in INCH and MM.  Inch is to 3-deicimal places
  • Opening of the machine is motorized, and driven by a 1HP TEFC motor
  • Swiveling control panel for more ergonomic access to machine controls
  • Easy to access external handwheel adjustment of infeed bed
  • The Table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds
  • A hand lubricator is provided for convenient lubrication to the table slideways and an auto lubricator provides lubrication to the caterpillar feed chain
  • Chipbreaker and top feed roller into top head is sectional
  • Rubber outfeed top rollers (2) to prevent chip marking
  • Over thickness safety shut-off bar across infeed.
  • Ammeter for each motor on control panel to monitor motor load
  • Side covers to protect operator around bottom head
  • Star Delta – soft Low Amperage Start
  • Isolator switch to shut off power to control panel for added safety.
  • Electrics are 230/3/60, or 460/3/60 to UL/CSA Standards (Specify at time of ordering)
SPECIFICATIONS
Maximum working Width 40”
Maximum working Thickness 8”
Minimum workpiece length 12.2”
Bottom Cutterhead head motor 40 HP TEFC
Top Cutterhead motor 50 HP TEFC
Feed motor 7.5 HP
Table elevation motor 1 HP
Cutterhead diameter 5.16”
Knife information 30mmx12mmx1.5mm
Cutterhead speed 4000 RPM
Feed speed (variable) 23-65 FPM
Dust collection 4 @ 6” diameter
Table size 40” x 103” high
Machine dimensions (LxWxH) 108 ¼” x 76 ¾” x 74.8”
Net weight 13,860 lbs. (6300 kgs.)
Packaging dimensions 112.2” x 80.7” x 80.7”
Gross weight 15,400 lbs. (7000 kgs.)